Technical sheets
| BambuLab A1 | |
|---|---|
| Body | |
| Build Volume: | 256*256*256 mm³ |
| Chassis: | Steel + Extruded Aluminum |
| ToolHead | |
| Hot End: | All-Metal |
| Extruder Gears: | Hardened Steel |
| Nozzle: | Stainless Steel |
| Max Hot End Temperature: | 300 ℃ |
| Nozzle Diameter (Included): | 0.4 mm |
| Nozzle Diameter (Optional): | 0.2 mm, 0.6 mm, 0.8 mm |
| Filament Cutter: | Yes |
| Filament Diameter: | 1.75 mm |
| Heatbed | |
| Compatible Build Plate: | Bambu Textured PEI Plate |
| Bambu Smooth PEI Plate | |
| Bambu High Temperature Plate (Smooth PEI) | |
| Bambu Cool Plate | |
| Mac Build Plate Temperature | 100 ℃ |
| Speed | |
| Max Speed of Toolhead: | 500 mm/s |
| Max Acceleration of Toolhead: | 10000mm/s² |
| Max Hot End Flow: | 28 mm³/s @ABS (Model: 150*150 mm single wall; Material: Bambu ABS; Temperature: 280 ℃) |
| Cooling | |
| Part Cooling Fan: | Closed Loop Control |
| Hot End Fan: | Closed Loop Control |
| Supported Filament | |
| PLA, PETG, TPU, PVA: | Ideal |
| ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer: | Not Recommended |
| Sensors | |
| Monitoring Camera: | Low Rate Camera (up to1080P) Timelapse Supported |
| Filament Run Out Sensor: | Yes |
| Filament Odometry: | Yes |
| Power Loss Recover: | Yes |
| Filament Tangle Sensor: | Yes |
| Physical Dimensions | |
| Dimensions: | 385*410*430mm³ |
| Net Weight: | 8.3 kg |
| Electrical Parameters | |
| Input Voltage: | 100-240 VAC, 50/60 Hz |
| Max Power: | 1300W@220V， 350W@110V |
| Electronics | |
| Display: | 3.5 inches 320*240 IPS Touch Screen |
| Connectivity: | Wi-Fi, Bambu-Bus |
| Storage: | Micro SD Card |
| Control Interface: | Touch Screen, APP, PC Application |
| Motion Controller: | Dual-Core Cortex M4 |
| Software | |
| Slicer: | Bambu Studio Support third party slicers which export standard Gcode such as Superslicer, Prusaslicer and Cura, but certain advanced features may not be supported. |
| Slicer Supported OS: | MacOS, Windows |
| Wi-Fi | |
| Frequency Range: | 2412 MHz - 2472 MHz (CE) 2412 MHz - 2462 MHz (FCC) 2400 MHz - 2483.5 MHz (SRRC) |
| Transmitter Power (EIRP): | ≤ 21.5 dBm (FCC) ≤ 20 dBm (CE/SRRC) |
| Protocol: | IEEE 802.11 b/g/n |
| Technology | X1-Carbon |
|---|---|
| Fused Deposition Modeling | |
| Body | |
| Build Volume(W D H) | 256 x 256 x 256 mm³ |
| Chassis | Steel |
| Shell | Aluminum & Glass |
| Tool Head | |
| Hot End | All-Metal |
| Extruder Gears | Hardened Steel |
| Nozzle | Hardened Steel |
| Max Hot End Temperature | 300 °C |
| Nozzle Diameter (Included) | 0.4 mm |
| Nozzle Diameter (Optional) | 0.2 mm, 0.6 mm, 0.8 mm |
| Filament Cutter | Yes |
| Filament Diameter | 1.75 mm |
| Heatbed | |
| Compatible Build Plate | Bambu Cool Plate, Bambu High Temperature Plate Bambu Textured PEI Plate, Bambu Smooth PEI Plate Bambu Engineering Plate(The otherside of Cool/High Temperature Plate) |
| Max Build Plate Temperature | 110°C @220 V, 120°C @110 V |
| Speed | |
| Max Speed of Tool Head | 500 mm/s |
| Max Acceleration of Tool Head | 20 m/s2 |
| Max Hot End Flow | 32 mm3/s @ABS (Model: 150 x 150 mm single wall; Material: Bambu ABS; Temperature: 280°C) |
| Cooling | |
| Part Cooling Fan | Closed Loop Control |
| Hot End Fan | Closed Loop Control |
| Control Board Fan | Closed Loop Control |
| Chamber Temperature Regulator Fan | Closed Loop Control |
| Auxiliary Part Cooling Fan | Closed Loop Control |
| Air Filter | Activated Carbon Filter |
| Supported Filament | |
| PLA, PETG, TPU, ABS, ASA, PET | Yes |
| PA, PC | Ideal |
| Carbon/Glass Fiber Reinforced Polymer | Ideal |
| Sensors | |
| Bambu Micro Lidar | Yes |
| Chamber Monitoring Camera | 1920 x 1080 Included |
| Door Sensor | Yes |
| Filament Run Out Sensor | Yes |
| Filament Odometry | Optional with AMS |
| Power Loss Recover | Yes |
| Physical Dimensions | |
| Dimensions | 389 x 389 x 457 mm³ |
| Net Weight | 14.13 kg |
| Electrical Requirements | |
| Voltage | 100-240 VAC， 50-60 Hz |
| Max Power | 1000 W @220 V， 350 W @110 V |
| Electronics | |
| Display | 5-inch 1280 x 720 Touch Screen |
| Connectivity | Wi-Fi, Bambu-Bus |
| Storage | 4 GB EMMC and Micro SD Card Reader |
| Control Interface | Touch Screen, APP, PC Application |
| Motion Controller | Dual-Core Cortex M4 |
| Application Processor | Quad ARM A7 1.2 GHz |
| Neural-Network Processing Unit | 2 Tops |
| Software | |
| Slicer | Bambu Studio Support third party slicers which export standard G-code such as Superslicer, Prusaslicer and Cura, but certain advanced features may not be supported. |
| Slicer Supported OS | MacOS, Windows |